Giỏ hàng

Floor Scrubber Ride on Scrubmaster B100R

Vendor: Hako
|
Contact
Floor Scrubber Ride on Scrubmaster B100R is a ride-on floor cleaning machine in the 65 cm range for economical wet cleaning of hard floors. Developed for tough, professional applications with high area and cleaning performance in confined areas. Cleaning is possible with plate or cylindrical brushes. Battery-electric drive and infinitely variable electronically controlled drive speed in forward and reverse.Drive : Drive speed and cleaning speed infinitely variable as a result of electronic drive control 0-6,5 km/h. The powerful drive motor with power reserves has a potential climbing ability up to 6% gradient when ready for operation.Brush drive : Plate brushes driven via spray water protected electric motors. Automatic lowering/engaging as well as lifting and disengaging by electric elevating pressure jacks. Brush pressure can be increased for extremely soiled areas (up to 72 kg).Tank system: Water tanks and covers are manufactured from impact-proof synthetic material which is chemical resistant, corrosion-free and temperature resistant.Scrubbing aggregates:Plate brush aggregate: the two plate brushes are driven via a 0.93kW motor with bothsided angular gears. The plate brushes are equipped with water and cleaning solution saving water retaining system Hako-Aqua-Stop. The brushes protrude slightly to enable working close to edges. The brush pressure is adjustable in two stages.Alternatively:Two counter-rotating cylindrical brushes guarantee an excellent result on structured floors or tiled floors with joints. The cylindrical brush unit also has a sweeping function. Larger debris is collected in a dirt hopper which is located behind the cylindrical brushes. Brush pressure is adjustable in two stages.Squeegee: Parabolically shaped squeegee for optimum suction performance and result even when cornering and on problematic floors. Automatic lowering/lifting via electric elevating pressure jacks. Working width 86 cm, optional 76 cm.Operator comfort : With a trun-switch all cleaning functions can be started in combination: lower brushes and start rotating, start supply of water, lower squeegee and start vacuum turbine. The machine can be pre-programmed by the Hako Service Department individually to meet the cleaning requirements of particular applications e.g. the brushes stop when the machine comes to a standstill in order to protect sensitive floor surfaces. Excellent manoeuvrability thanks to steered and driven front wheel and 90°steering angle in both directions. Turning in aisles within the machine length is possible.Robust, industrial quality and simple maintenance :Robust, sturdy welded and corrosion-proof heavy duty steel framework construction. Shock resistant, corrosion-free synthetic material tanks. Large tank opening to clean the dirty water tank. Battery compartment easy to access thanks to tippable tank. All components are easily accessible and exchangeable.Safe to operate : Safety key lock to protect against unauthorised operation. Automatic braking as a result of electronic drive control as well as independent foot parking brake. Automatic acoustic signal for safety when travellingbackwards, hour meter, horn. Battery charge display with level automatic shut-off to protect the drive batteries against damage caused by low discharge. Avoids battery depletion.Driver’s seat : Excellent view of the working area thanks to the centrally positioned driver’s seat. Seat can be adjusted without the need for tools.CSE-Superelastic-solid tyres: Non marking CSE-tyres with especially good grip are standard.Origin: Europe (Hako – Germany)Viet Ha is the officially - unique authority distributor of Hako Group in Vietnam. Contact now to be supported consultation and survey area for FREEScubber – driers, sweepers, automatic sweepers ( achieve quality standards Din EN ISO 9001:2008 and Din EN ISO 14001:2009) are distributed throughout the country.
Tiêu đề
Hotline SP 0918 06 4004
|

Floor Scrubber Ride on Scrubmaster B100R is a ride-on floor cleaning machine in the 65 cm range for economical wet cleaning of hard floors. Developed for tough, professional applications with high area and cleaning performance in confined areas. Cleaning is possible with plate or cylindrical brushes. Battery-electric drive and infinitely variable electronically controlled drive speed in forward and reverse.

Drive : Drive speed and cleaning speed infinitely variable as a result of electronic drive control 0-6,5 km/h. The powerful drive motor with power reserves has a potential climbing ability up to 6% gradient when ready for operation.

Brush drive : Plate brushes driven via spray water protected electric motors. Automatic lowering/engaging as well as lifting and disengaging by electric elevating pressure jacks. Brush pressure can be increased for extremely soiled areas (up to 72 kg).

Tank system: Water tanks and covers are manufactured from impact-proof synthetic material which is chemical resistant, corrosion-free and temperature resistant.

Scrubbing aggregates:
Plate brush aggregate: the two plate brushes are driven via a 0.93kW motor with bothsided angular gears. The plate brushes are equipped with water and cleaning solution saving water retaining system Hako-Aqua-Stop. The brushes protrude slightly to enable working close to edges. The brush pressure is adjustable in two stages.

Alternatively:
Two counter-rotating cylindrical brushes guarantee an excellent result on structured floors or tiled floors with joints. The cylindrical brush unit also has a sweeping function. Larger debris is collected in a dirt hopper which is located behind the cylindrical brushes. Brush pressure is adjustable in two stages.

Squeegee: Parabolically shaped squeegee for optimum suction performance and result even when cornering and on problematic floors. Automatic lowering/lifting via electric elevating pressure jacks. Working width 86 cm, optional 76 cm.

Operator comfort : With a trun-switch all cleaning functions can be started in combination: lower brushes and start rotating, start supply of water, lower squeegee and start vacuum turbine. The machine can be pre-programmed by the Hako Service Department individually to meet the cleaning requirements of particular applications e.g. the brushes stop when the machine comes to a standstill in order to protect sensitive floor surfaces. Excellent manoeuvrability thanks to steered and driven front wheel and 90°steering angle in both directions. Turning in aisles within the machine length is possible.

Robust, industrial quality and simple maintenance :
Robust, sturdy welded and corrosion-proof heavy duty steel framework construction. Shock resistant, corrosion-free synthetic material tanks. Large tank opening to clean the dirty water tank. Battery compartment easy to access thanks to tippable tank. All components are easily accessible and exchangeable.

Safe to operate : Safety key lock to protect against unauthorised operation. Automatic braking as a result of electronic drive control as well as independent foot parking brake. Automatic acoustic signal for safety when travelling
backwards, hour meter, horn. Battery charge display with level automatic shut-off to protect the drive batteries against damage caused by low discharge. Avoids battery depletion.

Driver’s seat : Excellent view of the working area thanks to the centrally positioned driver’s seat. Seat can be adjusted without the need for tools.

CSE-Superelastic-solid tyres: Non marking CSE-tyres with especially good grip are standard.

Origin: Europe (Hako – Germany)

Viet Ha is the officially - unique authority distributor of Hako Group in Vietnam. Contact now to be supported consultation and survey area for FREE

Scubber – driers, sweepers, automatic sweepers ( achieve quality standards Din EN ISO 9001:2008 and Din EN ISO 14001:2009) are distributed throughout the country.


Floor Scrubber Ride on Scrubmaster B100R

Technical data :

Scrubmaster

B100 R

Working width (plate/cylindrical brush)

cm

65

Effective suction width

cm

85

Area performance up to approx.

m²/h

4200

Working speed up to

km/h

6,5

Voltage

V

36

Protection class (VDE 0700)

class

III

Air volume, vacuum

m³/h

130

Pressure, vacuum

mbar

170

Drive motor capacity

W

560

Plate brush motor capacity

W

930

Cylindrical brush motor capacity

W

2 x 560

Vacuum motor capacity

W

740

Number of brushes

pcs.

2

Brush ∅ / plate brushes

cm

33

Brush ∅ / cylindrical brushes

cm

13

Brush revolutions plate / cylindrical

r.p.m.

300 / 900

Brush pressure up to

kg

72

Clean / dirty water tank

l

102 / 102

Dirt hopper, gross (cylindrical brush version)

l

1

Climbing ability ready for operation

%

6

Dimensions :

Length with squeegee

cm

148

Width with squeegee

cm

85

Width w/o squeegee (plate brush)

cm

73

Height

cm

149

Turning circle in aisle

 

cm

152

Total weight ready for operation

 

kg

580

viewed products

contact